For Sale
US addresses only. Shipping is $2.50 for the first item, $.50 for each additional item. All items have been tested to ensure that they work, but are sold as-is. PM me with your Paypal address.
Nichia 219A B10 700mA drop-ins 4 available - $15 each
XPG2 CW 700mA drop-in 1 available - $10
Generic P60 Xenon 4.2V drop-in - 2 available - $0.25 each
Details:
![]()
![]()
Nichia 700mA Drop-in.
LED is Nichia 219A B10 (92CRI, 4500K) from Illumination Supply reflowed to 16mm Al board.
Driver is Nanjg 101-AK-A1 configured to 3 modes (L-M-H). High mode is 700mA constant. 4.2V input.
Why 700mA instead of the usual 1.4A? I think 700mA offers the best combination of output, run time, and low heat for a 219A. 700mA translates to about 200 lumens, about 4 hours of continuous regulated run time on a single 18650, and very low heat. An SF L2 barely feels warm even after hours of continuous use with this drop-in.
The driver and the solder joints on the star are potted with Fujik for some added durability. Wires are 24ga sil wire.
The drop-ins are new, but each one has minor blemishes that were either there when I received the components or were caused by me during assembly. They range from barely visible flecks on the reflectors to scuff marks on the outer rim of the reflector. None of the blemishes impair function.
. . . . . . . . . .
![]()
XPG2 700mA Drop-in.
LED is XPG2 R5 1A
Construction is the same as the Nichia drop-ins.
. . . . . . . . . .
![]()
Xenon Drop-in.
These are new, unused. Your basic generic Xenon drop-in for single li-ion. Reflectors look clean.
US addresses only. Shipping is $2.50 for the first item, $.50 for each additional item. All items have been tested to ensure that they work, but are sold as-is. PM me with your Paypal address.
Nichia 219A B10 700mA drop-ins 4 available - $15 each
XPG2 CW 700mA drop-in 1 available - $10
Generic P60 Xenon 4.2V drop-in - 2 available - $0.25 each
Details:
Nichia 700mA Drop-in.
LED is Nichia 219A B10 (92CRI, 4500K) from Illumination Supply reflowed to 16mm Al board.
Driver is Nanjg 101-AK-A1 configured to 3 modes (L-M-H). High mode is 700mA constant. 4.2V input.
Why 700mA instead of the usual 1.4A? I think 700mA offers the best combination of output, run time, and low heat for a 219A. 700mA translates to about 200 lumens, about 4 hours of continuous regulated run time on a single 18650, and very low heat. An SF L2 barely feels warm even after hours of continuous use with this drop-in.
The driver and the solder joints on the star are potted with Fujik for some added durability. Wires are 24ga sil wire.
The drop-ins are new, but each one has minor blemishes that were either there when I received the components or were caused by me during assembly. They range from barely visible flecks on the reflectors to scuff marks on the outer rim of the reflector. None of the blemishes impair function.
. . . . . . . . . .
XPG2 700mA Drop-in.
LED is XPG2 R5 1A
Construction is the same as the Nichia drop-ins.
. . . . . . . . . .
Xenon Drop-in.
These are new, unused. Your basic generic Xenon drop-in for single li-ion. Reflectors look clean.