Being the latest victim to succumb to the siren spectrum of the Nichia 219, I have several lights & drop-ins that, being neither endowed with the 219, nor being manufactured by SureFire or Malkoff, are being unceremoniously dumped.
I give you BigBluefish's Fickle Flashaholic sale:
1. 4 Sevens Quark Hi CRI Lego. This light has a Quark standard head from a 1 x CR123a light with the XP-G Warm tint High CRI (85+) emitter. This head will run on an 1 x AA, 2 X AA (you will need a 2 x AA tube), 1 x CR123a (you will need a 1 x CR123a tube, or use a spacer in the 17670 tube), 1 x RCR (same), 1 x 14500 or 1 x 17670. It will NOT run on 2 x CR123a or 2 x RCR cells, at least not for more than a fraction of a second, at which point it will go :poof: It comes with an AA tube with reverse clicky and deep carry pocket clip, and a 2 x 123 tube (for use ONLY with 17670 cells) also with a reverse clicky and deep carry pocket clip. Also included are two 4 Sevens holsters, which I actually think are for the AA and 2 x AA versions, but the larger one will fit the light with the 17670 tube. Also comes with a lanyard, a couple extra O-rings, and the ziplock 4 Sevens bag with paperwork. Very good to excellent condition on this, probably less than 2 hours runtime.
Asking $65 shipped for the package.
2. JetBeam RRT-01. This is like new with the box and accessories and paperwork. I've had it about a week and installed the clip and tried it out, and while a neat little light, it just isn't for me. This seems to be a "transitional" version, with a cool XM-L, smooth reflector (a little more throw than the current OP reflector) a flush lanyard peg, so it will tailstand, and the newer short clip.
Got it discounted, so you will, too. Asking $55 shipped.
3. EDC+ X60L (P60 host compatible) LED drop-in module. XM-L T4 bin Warm White, 3.0 -6.0 volt for 1 x 17670, 1 x 18650 or 2 x CR123a. 3 Modes, no memory, starts on High. 380 Lumens Out-The-Front per EDC+. My observation says that's a little conservative. Very nice beam and level spacing. A very well-made drop-in. Excellent condition. Has about 3 hours of runtime on it. Asking $35 shipped.
4. Lumens Factory D26 (P60 host compatible) LED drop-in module. XP-G R5 bin Warm White High CRI (90) 3.6 - 13v single level. Probably about 250-275 lumens on 2 x CR123a. Don't know if it would be brighter, or just give longer runtime on higher voltage. Typical XP-G beam, decent throw, well defined hot-spot, warm tint (though not as warm, and a higher CRI, that the XP-G used in the Quarks). If you want a warm, single level drop-in for outdoor use, this would be worth a try. I just prefer the Nichia 219, so this one is going to be replaced. Asking $22 shipped.
I will try to post pictures tonight, though they won't show you anything that isn't in the descriptions above.
Shipping on these is CONUS only, USPS Priority. Sorry for no international shipping, it just makes the pricing of these less expensive items too complicated.
Payment by PayPal only, please.
First "I'll take it" in the thread, gets it, regardless of offers, pleas, or tirades in the PMs. PM me for questions if you have them, and for payment & shipping info after you have posted "I'll take it" in the thread. If you PM me and I answer your questions and you PM back and say, "Ok, I want it," then please immediately post your "I'll take it" in the thread so you don't get beat-out by someone else.
Thanks for reading my thread.
I give you BigBluefish's Fickle Flashaholic sale:
1. 4 Sevens Quark Hi CRI Lego. This light has a Quark standard head from a 1 x CR123a light with the XP-G Warm tint High CRI (85+) emitter. This head will run on an 1 x AA, 2 X AA (you will need a 2 x AA tube), 1 x CR123a (you will need a 1 x CR123a tube, or use a spacer in the 17670 tube), 1 x RCR (same), 1 x 14500 or 1 x 17670. It will NOT run on 2 x CR123a or 2 x RCR cells, at least not for more than a fraction of a second, at which point it will go :poof: It comes with an AA tube with reverse clicky and deep carry pocket clip, and a 2 x 123 tube (for use ONLY with 17670 cells) also with a reverse clicky and deep carry pocket clip. Also included are two 4 Sevens holsters, which I actually think are for the AA and 2 x AA versions, but the larger one will fit the light with the 17670 tube. Also comes with a lanyard, a couple extra O-rings, and the ziplock 4 Sevens bag with paperwork. Very good to excellent condition on this, probably less than 2 hours runtime.
Asking $65 shipped for the package.
2. JetBeam RRT-01. This is like new with the box and accessories and paperwork. I've had it about a week and installed the clip and tried it out, and while a neat little light, it just isn't for me. This seems to be a "transitional" version, with a cool XM-L, smooth reflector (a little more throw than the current OP reflector) a flush lanyard peg, so it will tailstand, and the newer short clip.
Got it discounted, so you will, too. Asking $55 shipped.
3. EDC+ X60L (P60 host compatible) LED drop-in module. XM-L T4 bin Warm White, 3.0 -6.0 volt for 1 x 17670, 1 x 18650 or 2 x CR123a. 3 Modes, no memory, starts on High. 380 Lumens Out-The-Front per EDC+. My observation says that's a little conservative. Very nice beam and level spacing. A very well-made drop-in. Excellent condition. Has about 3 hours of runtime on it. Asking $35 shipped.
4. Lumens Factory D26 (P60 host compatible) LED drop-in module. XP-G R5 bin Warm White High CRI (90) 3.6 - 13v single level. Probably about 250-275 lumens on 2 x CR123a. Don't know if it would be brighter, or just give longer runtime on higher voltage. Typical XP-G beam, decent throw, well defined hot-spot, warm tint (though not as warm, and a higher CRI, that the XP-G used in the Quarks). If you want a warm, single level drop-in for outdoor use, this would be worth a try. I just prefer the Nichia 219, so this one is going to be replaced. Asking $22 shipped.
I will try to post pictures tonight, though they won't show you anything that isn't in the descriptions above.
Shipping on these is CONUS only, USPS Priority. Sorry for no international shipping, it just makes the pricing of these less expensive items too complicated.
Payment by PayPal only, please.
First "I'll take it" in the thread, gets it, regardless of offers, pleas, or tirades in the PMs. PM me for questions if you have them, and for payment & shipping info after you have posted "I'll take it" in the thread. If you PM me and I answer your questions and you PM back and say, "Ok, I want it," then please immediately post your "I'll take it" in the thread so you don't get beat-out by someone else.
Thanks for reading my thread.