Please read before responding this will avoid any confusion for us
-The first unedited "ill take it" post takes precedence over pm's
-I accept paypal only, I will send you my paypal address via pm A.S.A.P.
-PP payment to be made within 24hours of exchanging PP info or it will go up for sale again
-Shipping will be via U.S.P.S. priority mail unless otherwise agreed upon
-tracking and insurance available for fee, i will not be responsible for U.S.P.S. mishaps once it leaves my hands
-Sale is to United States only
-I will only ship to a confirmed address provided by paypal
-Items will be shipped on Saturday's
-I reserve the right to withdraw the sales at anytime as I will also be putting these up for sale locally
-Please place the # of the item you are interested in, in your post as i will be putting multiple items on this thread
-I will be checking this thread at least once per day
-What you see in the photo is what you will be getting, minus the white photo paper in the background
-Most of my malkoff drop-ins have very little burn time on them as i like the color of my m60w drop-in. If i didn't care for the tint, the drop-in went back into the package it came in and has been sitting. This is not to say that the Malkoff drop-ins are "junk", I just found a color temp that I like.
***I am open to trades or partial trades***
-Looking for: -md3 or md4 body's with the protruding switch that does not allow the light to tail stand
-M60 MCE-W
-EDC/I.S. nichia triple p60 drop-in
#1 MALKOFF DEVICES M61W 3700K 80CRI XPG EMITTER
$55
This module was purchased straight from Gene's website and I am the original owner. It has about 3 minutes of runtime on it. I prefer a cooler tint than what this drop-in provides. The drop-in is in like new condition.
![]()
![]()
#2 MALKOFF DEVICES M61 XPG2 EMITTER
$50
This unit was purchased straight from Gene's website and I am the original owner. This drop-in has about 5 minutes of runtime on it.
It was designed specifically for use in Malkoff MD2, Elzetta ZFL-M60, and SureFire 6P, 9P, 6Z, C2, C3, M2, G3, and G2 flashlights. It may or may not fit other models. The input voltage is 3.4 - 9 volts. Below 3.4 volts it will drop out of regulation and run direct drive. The output is approximately 325 measured out the front lumens.
![]()
![]()
#3 MALKOFF DEVICES M91AW 3000K 80CRI XML2 EMITTER
$85
This unit was purchased straight from Gene's website and I am the original owner. This drop-in has about 5 minutes of runtime on it.
This dropin produces a very floody beam. It is an outstanding room lighter and short range spotter. It was designed specifically for use in Malkoff MD Series (3 or 4) with MD2 Head, Elzetta ZFL Series (3 cell), and SureFire 9P and C3 flashlights. It may or may not fit other models.![]()
![]()
#4 MALKOFF DEVICES M60F CRE XP-G EMITTER 20* optic
$75 SOLD to silgt
This unit was purchased straight from Gene's website and I am the original owner. This drop-in has about 3 minutes of runtime on it. I bought it back in early 2009 and it has sat in the package that it came in after trying it out and liking the MCE-W more.
The input voltage is![]()
![]()
#5 MALKOFF DEVICES MAGLITE D-P7 DROP-IN 700 lumens N.I.P.
$150
This unit was purchased straight from Gene's website and I am the original owner. This is a maglite drop in for the "D" cell sized maglite. This drop in has 700 lumens of white light. I bought a total of 5 of them back in early 2009. 3 were sold to co-workers who wanted a light like mine. 1 of the drop-ins I still use for work running off of 2x18650 AW2600mah batteries in a 2D maglite with pvc sleeve. I get about 1hr 50min of runtime before the battery protection kicks in. Unlike the XML drop in Gene currently sells that run on 3-4 NIMH'S, this P7 drop-in can run in "D" sized maglites up to the voltage of a maglite 6D using alkaline cells for full output. This would be great for a collector as it has never been fired up and is still sealed in the factory package.
![]()
![]()
#6 ULTRAFIRE WF-139 QUICK CHARGER
$15
This charger was purchased from light hound and is in "like new condition." I maybe used it a couple times and put it away because i have another one I normally use to charge my 18650's. There is a smudge on the sticker in the 2nd photo but when i look at the charger i don't see anything. It works as it should.:wave:
https://www.lighthound.com/Ultrafire...er_p_2279.html
![]()
![]()
#7 ULTRAFIRE WF-139 QUICK CHARGER
$13
This charger was purchased from light hound and is in "used condition." I maybe used it a couple times and put it away because i have another one I normally use to charge my 18650's. I normally use this charger to charge my batteries and it does show some wear. Please look at the photo's. It works as it should.
https://www.lighthound.com/Ultrafire...er_p_2279.html
![]()
![]()
#8 ULTRAFIRE 3.6 VOLT OR 3 VOLT RCR123 LITHIUM BATTERY CHARGER N.I.B.$12
This charger was purchased from light hound and is in "new in box condition."
https://www.lighthound.com/Ultrafire...er_p_2270.html
![]()
![]()
-The first unedited "ill take it" post takes precedence over pm's
-I accept paypal only, I will send you my paypal address via pm A.S.A.P.
-PP payment to be made within 24hours of exchanging PP info or it will go up for sale again
-Shipping will be via U.S.P.S. priority mail unless otherwise agreed upon
-tracking and insurance available for fee, i will not be responsible for U.S.P.S. mishaps once it leaves my hands
-Sale is to United States only
-I will only ship to a confirmed address provided by paypal
-Items will be shipped on Saturday's
-I reserve the right to withdraw the sales at anytime as I will also be putting these up for sale locally
-Please place the # of the item you are interested in, in your post as i will be putting multiple items on this thread
-I will be checking this thread at least once per day
-What you see in the photo is what you will be getting, minus the white photo paper in the background
-Most of my malkoff drop-ins have very little burn time on them as i like the color of my m60w drop-in. If i didn't care for the tint, the drop-in went back into the package it came in and has been sitting. This is not to say that the Malkoff drop-ins are "junk", I just found a color temp that I like.
***I am open to trades or partial trades***
-Looking for: -md3 or md4 body's with the protruding switch that does not allow the light to tail stand
-M60 MCE-W
-EDC/I.S. nichia triple p60 drop-in
#1 MALKOFF DEVICES M61W 3700K 80CRI XPG EMITTER
$55
This module was purchased straight from Gene's website and I am the original owner. It has about 3 minutes of runtime on it. I prefer a cooler tint than what this drop-in provides. The drop-in is in like new condition.
It was designed specifically for use in Malkoff MD2, Elzetta ZFL-M60, and SureFire 6P, 6Z, C2, M2 and G2 flashlights. It may or may not fit other models. The input voltage is 3.4 - 9 volts. Below 3.4 volts it will drop out of regulation and run direct drive. The output is approximately 200 measured out the front lumens.
#2 MALKOFF DEVICES M61 XPG2 EMITTER
$50
This unit was purchased straight from Gene's website and I am the original owner. This drop-in has about 5 minutes of runtime on it.
It was designed specifically for use in Malkoff MD2, Elzetta ZFL-M60, and SureFire 6P, 9P, 6Z, C2, C3, M2, G3, and G2 flashlights. It may or may not fit other models. The input voltage is 3.4 - 9 volts. Below 3.4 volts it will drop out of regulation and run direct drive. The output is approximately 325 measured out the front lumens.
#3 MALKOFF DEVICES M91AW 3000K 80CRI XML2 EMITTER
$85
This unit was purchased straight from Gene's website and I am the original owner. This drop-in has about 5 minutes of runtime on it.
This dropin produces a very floody beam. It is an outstanding room lighter and short range spotter. It was designed specifically for use in Malkoff MD Series (3 or 4) with MD2 Head, Elzetta ZFL Series (3 cell), and SureFire 9P and C3 flashlights. It may or may not fit other models.
The input voltage is 5.5 - 12 volts.
Below 5 volts it will flash repeatedly or turn off (depending on batteries used). The output is approximately 700 measured out the front lumens at turn on and 625 continuous lumens after warm up.
#4 MALKOFF DEVICES M60F CRE XP-G EMITTER 20* optic
$75 SOLD to silgt
This unit was purchased straight from Gene's website and I am the original owner. This drop-in has about 3 minutes of runtime on it. I bought it back in early 2009 and it has sat in the package that it came in after trying it out and liking the MCE-W more.
The input voltage is
3.8V-9V
and 235+ lumens of pure white floody light. This sought after drop-in is no longer made.
#5 MALKOFF DEVICES MAGLITE D-P7 DROP-IN 700 lumens N.I.P.
$150
This unit was purchased straight from Gene's website and I am the original owner. This is a maglite drop in for the "D" cell sized maglite. This drop in has 700 lumens of white light. I bought a total of 5 of them back in early 2009. 3 were sold to co-workers who wanted a light like mine. 1 of the drop-ins I still use for work running off of 2x18650 AW2600mah batteries in a 2D maglite with pvc sleeve. I get about 1hr 50min of runtime before the battery protection kicks in. Unlike the XML drop in Gene currently sells that run on 3-4 NIMH'S, this P7 drop-in can run in "D" sized maglites up to the voltage of a maglite 6D using alkaline cells for full output. This would be great for a collector as it has never been fired up and is still sealed in the factory package.
#6 ULTRAFIRE WF-139 QUICK CHARGER
$15
This charger was purchased from light hound and is in "like new condition." I maybe used it a couple times and put it away because i have another one I normally use to charge my 18650's. There is a smudge on the sticker in the 2nd photo but when i look at the charger i don't see anything. It works as it should.
#7 ULTRAFIRE WF-139 QUICK CHARGER
$13
This charger was purchased from light hound and is in "used condition." I maybe used it a couple times and put it away because i have another one I normally use to charge my 18650's. I normally use this charger to charge my batteries and it does show some wear. Please look at the photo's. It works as it should.
#8 ULTRAFIRE 3.6 VOLT OR 3 VOLT RCR123 LITHIUM BATTERY CHARGER N.I.B.$12
This charger was purchased from light hound and is in "new in box condition."
https://www.lighthound.com/Ultrafire...er_p_2270.html
